CONTACTOS

- Where can I find the weight of the shredder?

You can find the weight of the shredder on its website page in the technical data sheet or in the general catalog.

- What rotor bearings are assembled in the mulcher?

There are several rotor bearings according to the number of revolutions and weight of the rotor.

There is therefore no single solution.

There are solutions that can also be very different from each other.

- How do I choose the mower according to the tractor?

The recommended tractor is shown in the technical sheet on the website page of the machine or in the general catalog.

- How can I compare the mulchers?

- Where can I find how many belts are assembled?

The number of belts that is assembled in the machines is shown in the technical data sheet on the website page of the machine or in the general catalog.

- What supports are applied for hammers?

- Where can I find TIERRE products?

- What are the dimensions of the machines?

The dimensions of the machines are shown in the technical data sheets on its website page or in the general catalog.

- What are the dimensions of the rotors?

The diameter of the rotors is shown in the technical data sheet on the website page of the machine or in the general catalog.

- What are the diameters of the rollers?

The diameter of the rollers is shown in the technical data sheet on the website page of the machine or in the general catalog.

- Where can I find the spare parts for the shredders?

You can find the spare parts here: https://cloud.interactivespares.com/tierre/login

- Who can I contact in case of problems with the flailmowers purchased?

- What is the RAL of Tierre orange?

RAL 2009

- What is the cutting speed of the mower?

The cutting speed of the machine is shown in the technical data sheet on the website page of the machine or in the general catalog.

- The rotor oscillates from right to left of 5mm, is this normal?

No, it is not normal because on the right side of the machine there is a Seger that blocks the rotor, which should give an oscillation of maximum 2mm.

It is possible that the Seger has not been applied or, there is also the possibility, that the customer has an old machine with a blind flange in which the locking on the Seger was not fixed.

However his type of problem does not affect the overall performance of the machine nor is it harmful to the components.

- What is the thickness of the chamber?

The thickness of the chamber varies according to the mulcher model and its aim.

- Can a shredder be mounted on a tractor that has the PTO turning counterclockwise?

Yes, it is possible only in case that the machine has a double power take-off unit and therefore it is REVERS.

- What is the thickness of the rotor of the shredders?

The thickness of the rotor varies according to the model of the shredder and its length.

- What material are rotor tubes made of?

Rotor tubes are made of structural steel. It is the same steel with which the metal structures such as cranes and bridges, are made.

- What is the thickness of the roller of the mowers?

The thickness of the roller varies according to the model of the mower and its length.

- What material are knives made of?

30MnCrB5 Hardened HRC 48 +/- 2

- What material are hammers made of?

30MnCrB5 Hardened HRC 48 +/- 2

- What is HARDOX sheet metal?

Visit the page dedicated to HARDOX in our website: https://www.tierreonline.com/hardox

CONTACTOS

CONTACTS

Via Valsugana, 24
35010 Curtarolo (PD) Italy
C.F. e P.IVA IT 0389 1060281

ENLACES

Subscribe to keep you always up to date with TIERRE news!

Click here to subscribe!

Phone +39 049 9620631
Fax +39 049 557139

commerciale@tierreonline.com
REA 345 184
Nominal capital € 100.000 

CUOTA

© All Rights Reserved by Tierre Group S.r.l